The HEYI CCT-24 split-core CT is part of the Tesla Solar and energy storage project. The compact mounting kit measures alternating current on distribution plates and measuring boxes with limited installation space.

1. Where do solar and storage systems need external CT?
1.1 Typical AC measuring points
When using a split-core current transformer for solar metering, select a measurement point based on the power flow to follow.
1.2 Example of industrial application of FranklinWH
In some installations, the connection of a photovoltaic system or a charging sub-panel via the internal CT aGate prevents the capture of electrical flow. FranklinWH uses its own external split-core CT kit to meter the affected circuits and incorporate those readings into the FHP system. FranklinWH Split CT Kit
The assembly uses magnetic induction to generate a low-level current signal, with a sensor circuit electrically isolated from the source conductor. Its clamp construction simplifies mounting around existing cables. FranklinWH Split CT Datasheet
2.How does the CCT-24 work in the measuring system?
2.1 Magnetic induction and closure assembly
A split-core CT uses the changing magnetic field around the alternate conductor to induce a weak signal in its secondary winding. The signal is proportional to the initial current and the sensor circuit remains electrically separate from the conductor. A compatible measuring apparatus connects the CT signal to the corresponding phase voltage for the calculation of power and energy. Housing adjustment simplifies modernization by mounting around an existing insulated cable while the cable remains finished.
2.2 CCT-24 Specifications
|
Parameter |
CCT-24 |
|
Primary current |
0–250 A AC |
|
Secondary output |
333 mV AC (0.333 V) or 250 mA AC |
|
Accuracy class |
Class 0.5 |
|
Frequency |
50/60 Hz |
|
Aperture diameter |
24.6 mm |
|
Operating temperature |
−25 °C to +75 °C |
2.3 Compatibility of measuring instruments and installation space
The 333 mV split-core CT uses an integrated precision load resistor. For stand-alone meters and OEM projects, adjust the output and CT ratio to the meter input and parameters. Leave enough space for the clamp to open inside the box.
3. Where Else Can Split-Core CTs Be Used?
3.1 Power, Energy and Equipment Monitoring
|
Application |
What the Current Readings Support |
|
Power metering |
Measure circuit-level power and energy with a compatible meter. |
|
Building submetering |
A current transformer for building submetering supports consumption analysis, energy efficiency monitoring and cost allocation by area or tenant. |
|
Power quality monitoring |
Provide current data for monitoring distribution equipment when the CT meets the instrument’s bandwidth requirements. |
|
Equipment condition monitoring |
Track changes in operating current on conveyors, pumps and other motor-driven equipment. |
|
Hybrid inverters for home energy storage |
Pair a split-core CT for home energy storage with a compatible hybrid inverter or external meter to monitor an AC feeder. |
|
Distribute |

4. How to request a price for CCT-24?
4.1 Project details for RFQ
Send to HEYI the introduction scheme, the model of the meter or converter, the expected alternating current, the outer diameter of the cable, the required power and the estimated amount. We can review the metering point and help you select a CCT-24 split-core CT configuration. heyi@heyiele.com
Compay: WENZHOU HEYI ELECTRICAL CO.,LTD
Brand: HEYI/ASCT
Contact: Bethy
E-mail: heyi@heyiele.com
Tel: 86-13968747975